2” Full Bore Blacko Ball Valve — inlet flange drilled 4 x
18mm holes on a 125mm PCD (DIN50 PN16); outlet
flange with 4 x 18mm open slots on a 120.7mm minimum
diameter to suit 2” ASA150 and DIN50 PN40. Left hand
operated with TIR facility to handle. Contact parts
manufactured in 316 stainless steel with PTFE seals.
Options — Full range of air inlet and discharge ball valves
available, both manually and mechanically actuated.
Steam-heated version.


Weight 5.5 Kg
Design Pressure (MAWP) 7 Bar (101.5 PSI)
Hydraulic Test Pressure 15 Bar (217.5 PSI)
Design Temperature Range -40°C to 205°C
(-40° F to 400°F)
Design Approval by Lloyds Register of Shipping
Approved to BS EN14432